Providing nutritional and food composition analysis with a focus on automation, quality, efficiency, accuracy, and safety. Solutions conform with a variety of ISO, AOAC and EPA methods. Learn more about other FOSS solutions in the dairy, feed/forage, grain, meat, beverage, and raw milk testing industries by clicking here.
The Kjeltec™ 9 Analyser provides fully automated Kjeldahl analysis.
Sample types: Raw materials and finished products in food, feed and agriculture. Water and wastewater and a wide range of industrial samples.
Parameters: Nitrogen, protein, ammonia, TKN.
20 and 60 sample autosampler and distillator also available.
The Digestor™ 2508 and 2520 with lift system is a fully automated digestion solution, available with either 8 or 20 positions and optimal for the busy laboratory.
Sample types: Raw materials and finished products in food, feed, agriculture and related matrices. Water and wastewater and a wide range of industrial compounds.
Parameters: Kjeldahl digestion, chemical oxygen demand and other reflux chemistries, trace metal analysis by AAS or ICP instruments.
DT 208 and DT 220 Digestor™ also available.
The Soxtec™ 8000 extraction unit is a fully automated system with 6 positions, upgradable to 12.
Sample types: All samples that are extractable in solvent: raw materials, intermediates and finished products in food, feed, soil, sludge, polymers, paper pulp, textiles and more.
Parameters: Crude, free fat and other extractables. Total fat (when used with Hydrotec™ 8000).
ST 255 Soxtec™ and ST 243 Soxtec™ also available.
Micral™ LIBS is based on Laser Induced Breakdown Spectroscopy (LIBS). With a preparation time of 3 minutes per sample,
60 samples can be loaded into the analyzer with results in 60 minutes.
Sample types: Grass silage, corn silage, alfalfa/legume hay, hay, fresh grass, haylage, mixed hay, sorghum, straw, grass and clover and barley silage (whole crop silage), soil, fertilizer, and more.
Parameters: 6 macro elements: calcium (Ca), magnesium (Mg), phosphorus (P), potassium (K), sodium (Na), sulfur (S). 6 micro elements: aluminum (AI), boron (B), copper (Cu), iron (Fe), manganese (Mn), zinc (Zn).
The Fibertec™ 8000 is a fully automated filtration system following the official reference methods.
Sample types: Feed, raw materials and finished products in feed and agriculture.
Parameters: Crude fiber (CF), neutral detergent fiber (NDF), amylase treated neutral detergent fiber (aNDF), acid detergent fiber (ADF), and acid detergent lignin (ADL).
FT 122 FIbertec™ and Fibertec™ 1023 also available.
The NIRS™ DS3 is highly versatile and perfect for rapid screening. Shorten your turnaround time, reduce waste and reduce the use of harmful chemicals to optimize cost and ensure sustainable operations.
Sample types: Feed, forage, soil, and more.
Parameters: Fat, protein, moisture, ash, starch plus the option to develop additional calibrations such as amino acids, NDF, ADF, dietary fiber, sugar, soil organic carbon (SOC), clay, pH and more.
NIRS™ DA1650 and NIRS™ DS3F also available.
The FoodScan™ 2 is a highly reliable and accurate solution for checking final product quality, and provides all label parameters in just seconds. AOAC approved for meat samples.
Sample types: Meat, ready-to-go meals, sausage, dairy and similar plant-based products.
Parameters: Fat, moisture, protein, salt, ash, collagen, solids-non-fat (calculated) and total solids, pH in fermented products, saturated fat and fatty acids, carbohydrates, energy, sodium, water activity and color measurement.
The MilkoScan™ FT3 offers an intelligent approach to dairy analysis including the power to test a wide variety of liquid and semi-solid dairy and similar plant-based products at a low cost of ownership, with exceptional uptime and unprecedented consistency of results.
Sample type: Compositional analysis of liquid and semi-solid dairy products such as milk, cream, whey, yoghurt, creme fraiche, milk and whey concentrates incl. WPC, chocolate milk and similar plant-based products.
Parameters: Global calibrations: Fat, protein, lactose incl. low lactose products, total solids, solids-non-fat, freezing point, titratable acidity, density, free fatty acids, citric acids, casein, urea, sucrose, glucose, fructose and galactose. Targeted and untargeted adulteration screening.
The CM 290 Cemotec™ laboratory mill is ideal for preparation of samples with low fat and low moisture content, e.g. grain or seed samples.
The CT 293 Cyclotec™ laboratory mill has a high grinding speed and is excellent for sample preparation where the requirements for fineness and uniformity of particle size is essential.
The KN 295 Knifetec™ laboratory mill is ideal for preparation of high fat, high moisture and fibrous samples.
The Hammertec™ is ideal for dried, flowable, whole cereal grain samples and is specially designed for falling number analysis (Alphatec™ FNo), NIR, nitrogen combustion methods, and other reference analyses.
