Ensure safe operations with FOSS pioneered SAfE* mode for safe distillation of samples that form salt cakes and bellow pumps for accurate reagent dispensing. A variable output steam generator broadens the application area to other volatile components.
*Steam Addition for Equilibration
Accurate reagent dispensing reduces cost per test. At the same time, a self-adjusting cooling water system saves water to further reduce cost, while long-life components ensure minimal downtime. Corrosion-free materials and alkali resistant plastic splash head/tube draining vessel secure long instrument lifetime.
| Performance data at 230 V | |||||
| Analysis time | 3.5 minutes at 30 mg N (6.5 minutes at 200 mg N) |
||||
| Distillation capacity | ~ 40 ml/min at 230 V (at 100 % steam addition) | ||||
| Measuring range | 0.1 - 210 mg N | ||||
| Reproducibility | 1% RSD (including the digestion step) | ||||
| Recovery | 99.5 - 100.5% at nitrogen levels between 1 - 200 mg N | ||||
| Tube draining | 200 ml in less than 10 seconds | ||||
| Reagent pump volume | 0 - 150 ml in steps of 10 ml | ||||
| Delay | 0 - 1800 seconds | ||||
| SAfE (FOSS pioneered) | Auto 5 seconds | ||||
| Variable steam addition | 30-100% in steps of 10% | ||||
| Software | FossCare™, SmartCare™ | ||||
| Installation requirements | |||||
| Power supply | 200 - 240 VAC 50 - 60 Hz | ||||
| Tolerable voltage variation | ± 10% | ||||
| Power consumption | 3000 W | ||||
| Water consumption (during distillation only) |
3 l/min at water temp of 30°C* 1 l/min at water temp of 15°C |
||||
| Ambient temperature | 5 - 40°C | ||||
| Ambient humidity | Max. 80% relative | ||||
| Drain | For cooling water only | ||||
| Weight net |
46 kg | ||||
| Dimensions (w×d×h) cm | 50 × 48 × 76 | ||||
| *Circulating Cooler recommended at >30 °C. | |||||
| SmartAnalytics | |||||
| This instrument is SmartAnalytics enabled. Turn your data into actionable insights that give you full control of your production across sites. Increase your efficiency, accuracy and uptime to ensure the safe and consistently high-quality food and feed products your customers expect. | |||||
| Accessories • Manual titration unit complete, 50 ml • Basket for 20 receiver flasks (250 ml) • Receiver flasks, 250 ml (set of 10) • Kit for distillation by-pass • Cable for connection of external titrator |
|||||
Choose from varying levels of automation tailored to meet the needs of your laboratory.
| Kjeltec™ 9 Distillator |
Kjeltec™ 9 Analyser |
Kjeltec™ 9 Analyser + Autosampler |
||
| Colorimetric titration system | x | x | ||
| External titrator connection | Optional | |||
| Results calculation | x | x | ||
| Interchangeable burette | x | x | ||
| Ticket Printer | x | x | ||
| Variable output steam generator | x | x | x | |
| Water saving system | x | x | x | |
| Cooling water flow control | x | x | x | |
| Distillate temperature monitor | x
|
x | x | |
| Polypropylene splash head | x | x | x | |
| Polypropylene tube emptying vessel | x | x | x | |
| Bellows pumps for reagent addition | x | x | x | |
| Automatic alkali addition | x | x | x | |
| Automatic dilution water addition | x | x | x | |
| Automatic receiver solution addition | x | x | x | |
| SAfE - Steam Addition for Equilibration | x | x | x | |
| Tube emptying / waste collection | x | x | x | |
| Reagent alarms | x | x | x | |
| Removable drip tray | x | x | x | |
| Automatic tube door | x | x | x | |
| Interlocked tube door | x | x | x | |
| Removable tube door | x | x | x | |
| Tube-in-place safety | x | x | x | |
| Tube replacement sensor | x | x | x | |
| Reagent tank trolley | Optional | |||
| Balance connection (Kjeltec Registration) | x | x | ||
| Alerts and Notifications | Optional | Optional | ||
| Storage of raw data in instrument | 200 batches | 200 batches | 200 batches | |
| Upload of instrument diagnostic data | Optional | Optional | Optional | |
| Cloud management of results and data | Optional | Optional | ||
| Ethernet connection for network | x | x | x | |
| Wi-Fi connection | Optional | Optional | Optional |
