Reduce calibration maintenance and development costs with one global ANN calibration that covers all types of meat and meat product
If you need to control parameters or products that are not covered by the ANN calibrations, we can support you with the tools and competences required to make customised models.
Ensure indisputable results with advanced digital service and support solutions. Whatever your needs, we have a SmartCare™ solution that is tailored to match the requirements of your analytical set-up.
•Get total control of your FoodScan 2 units across different locations with instrument networking. Check that your analyser is performing optimally from anywhere.
•Ensure FoodScan 2 uptime, verify analytical performance and document performance for audit purposes.
Foodscan™ 2 is the only near infrared (NIR) analyser that is AOAC approved for analysis of meat products. This is valuable for any laboratory and others required to use officially approved methods. FoodscanTM 2 is also approved by the Australian Quarantine and inspection Service (AQIS) and Polska Noma in Poland.
Innovative batch standardization software makes it easy to standardize your batches.
There is no need for manual calculation, so you can avoid the risk of human errors.
1. Key in the target volume and fat% of the batch on the FoodScan 2 display
2. Add information about present volume produced
3. Based on the fat % of the sample the FoodScan 2
will inform you of the type and volume of raw material you need to add
4. Reach your batch target
The demand for greater efficiency grows as meat plants increase throughput and introduce new end-products to stay competitive and meet changing consumer preferences. This adds to the workload at the process line and in the QA laboratory.
With FoodScan 2 time to result is reduced by up to 50 %.
Faster analysis time enables faster processing of each
batch, increased production efficiency and better profit.
With analytics packages for plant-based products, producers of plant-based meat have access to the same rapid and easy to use analysis as producers of traditional meat products.
Vital data on key parameters provides actionable insights throughout the production process allowing producers to optimize product development and production processes, limit waste and reduce cost.
Learn moreFoodScan™ 2 Pro
FoodScan™ 2 Lab TS
FoodScan™ 2 Lab
| Item | Specification |
| Power supply | 100-240 VAC, 50-60 Hz. |
| Power consumption | Max 110 VA |
| Ambient temperature | 5-35 ºC (41–95 ºF) for FoodScan 2 Pro and FoodScan 2 Lab TS (with embedded PC) 5-40 ºC (41–104 ºF) for FoodScan 2 Lab (without embedded PC) |
| Altitude | Up to 2000 m |
| Relative humidity | <93 % RH |
| Minimum PC requirement (for external PC for FoodScan 2 Lab) |
Dual core 2.8 GHz |
| Operating system required (for external PC for FoodScan 2 Lab) |
Windows 10 (64 bit) Pro, Enterprise |
| Software | ISIScan™ Nova |
| Interfaces |
1 USB and 1 Ethernet for FoodScan 2 Pro 2 USB and 1 Ethernet for FoodScan 2 Lab TS |
| Technology |
NIR transmission, wavelength 850-1100 nm NIR reflection, wavelength 400 – 700 nm Monochromator based |
|
Display |
10.4’’ TFT touch screen for FoodScan 2 Pro and FoodScan 2 Lab TS |
| Barcode reader support | HID-POS |
| Protection class |
IP 65: FoodScan 2 Pro |
|
Analysis time |
App. 25 sec. with 18 independent samples (large cup) App. 20 sec. with 7 independent samples (medium cup) App. 15 sec. with 3 independent sub samples (small cup) |
| Check cell | Included |
| Weight | 31 kg for FoodScan 2 Pro 30 kg for FoodScan 2 Lab TS 29,5 kg for FoodScan 2 Lab |
| Dimensions (W x D x H) | 52 x 49 x 35 cm (20.8 x 19.6 x 14 inches) |
| Recommended bench space (W x D) | 60 x 70 cm (24 x 28 inches) if operated with built-in PC for FoodScan 2 Pro and FoodScan 2 Lab 100 x 70 cm (40 x 28 inches) if operated with external PC for FoodScan 2 Lab |
| Optional Services | |
| Digital Services | FossAssure™, FossManager™ |
| Care Solutions | FossCare™, SmartCare™ |
